Setting The Alarm - Hama RC 650 Instrucciones De Uso

5.3 Setting the alarm

Setting Alarm 1
• Press the AL1 (7) button. The bell icon appears.
• Press the AL1 (7) button for approx. 3 seconds until the hour digits start ashing.
You can set the hours with the UP (8) and DOWN (10) buttons.
• Press the SET (9) button until the minutes digits start ashing. You can set the
minutes with the UP (8) and DOWN (10) buttons.
• Press the SET (9) button to save the set alarm time.
Setting Alarm 2
• Press the AL2 (11) button. The (bell) icon appears.
• Press the AL2 (11) button for approx. 3 seconds until the hour digits start ashing.
You can set the hours with the UP (8) and DOWN (10) buttons.
• Press the SET (9) button until the minutes digits start ashing. You can set the
minutes with the UP (8) and DOWN (10) buttons.
• Press the SET (9) button to save the set alarm time.
Activating Alarm 1/Alarm 2:
• Press AL 1 to activate Alarm 1. The bell icon appears above the time
• Press AL 2 to activate Alarm 2. The bell icon appears below the time
• Alarm 1 and Alarm 2 can both be activated at the same time.
Deactivating Alarm 1/Alarm 2
• When ALARM 1 / ALARM 2 goes off, the corresponding alarm symbol (bell with AL1
/ bell with AL2) ashes.
• Press the alarm button AL1 to switch off Alarm 1.
• Press the alarm button AL2 to switch off Alarm 2.
• Moving your hand over the SNOOZE/LIGHT sensor (1) stops the alarm and turns
on the backlight for 5 seconds.
• The display for repeating the alarm Z
minutes.
5.4 Backlighting
• Press the SNOOZE / LIGHT button on the top of the clock to activate the backlight.
5.5 Switch between Celsius and Fahrenheit
• Press the DOWN button to switch between °C and °F.
ashes . The alarm will start again after 5
z
5