Cleaning And Disinfection - DePuy Synthes FMS Manual Del Usuario

• Failure to follow all applicable instructions may result in serious surgical consequences to the patient.
• Do not use flammable agents when cleaning and disinfecting.
• Do not wrap Remote Hand Control cable around metal objects. Wrapping cables around metal
objects may induce currents that could lead to electric shock, fire and/or injury to patient or surgical
personnel.
• This device has been tested and found in compliance with limits of medical devices according
IEC 60601-1-2 standard. These limits are designed to provide reasonable protection in a typical
medical installation, against harmful interference when devices are located in close proximity. If the
pump is causing harmful interference with other devices, turn the main power off, then on again to
determine if it is causing the interference, relocate the system or separate it from other devices. If you
cannot resolve the problem contact DePuy Customer Service at 1-800-382-4682. In the European
Union, contact your local affiliate.
• Disconnect the device from the pump when cleaning or inspecting.
PRECAUTIONS
• Read the instructions, cautions, and warnings provided with all FMS VUE System accessories before
use. Your sales representative can advise which accessories are used with the FMS VUE System.
• Electrical safety testing should be performed by a biomedical engineer or other qualified person.
INSTRUCTIONS FOR USE
Refer to the following documents for instructions for use with each system.
FMS VUE Operator's Manual (Ref. 110665)
FMS NEXTRA Instruction Manual (Ref. 109652)

CLEANING AND DISINFECTION

This Remote Hand Control can be soaked and autoclaved.
DO NOT WET THE CONNECTOR.
3