ESAB TUBMATIC 0401700 Manual De Instrucciones página 15

1) SAFETY
This manual has the purpose to guide experienced people about installation, operation and maintenance
for TUBMATIC. DO NOT allow non-qualified personnel to install, operate or repair this equipment.
You must read and understand all information in this manual.
Remember that:
2) DESCRIPTION
2.1) General characteristic
The wire feeder TUBMATIC is ideal for semi-automatic welding, especially using covered
protection, in medium or heavy duty work.
It is fed with output power source voltage , which can be with constant current or constant voltage
characteristic.
TUBMATIC is ready for connection to a constant current power source (factory setting). For connection to a
constant voltage power source see section 5.2.
It is projected to receive bobbins of 300 mm external diameter (international standard spool 25) and 15 kg of
wire or bobbins eith 420 mm external diameter (international standard spool 25) and 30 kg of wire with the
crosshead supplied with the equipment.
A mechanism with electric engine
to the welding place pushed throught the wire system (push system).
E
lectrical shock can kill
W
elding smoke and gases can be harmful to your health
E
lectrical arcs burn the skin and hurt your sight
N
oise in high level can damage your hearing
S
park and metal particles and wire end can hurt your eyes
and electronic comand makes the wire slip in the welding gun conduit up
wire or with gas
15
Tubmatic