ASSEMBLY INSTRUCTIONS:
Item includes: Fig. 1
A-Fountain Top,
B-Fountain Base
C- River Rocks
D-Pump
E-Adapter
F- Lights
1. Unpack the product from package carefully. Keep packaging material for safe storage.
2. Familiarize yourself with the pump. The pump speed is controlled by the switch
located at the front of the pump. The speed is indicated by a plus(+) and minus(–)
sign. (Figure 2) To increase the speed, move the switch slowly in the direction of
the plus sign. You will hear a click as the switch moves to each speed level. At its
highest speed level, the switch will cease to move any further. To decrease the
pump speed, move the switch toward the
minus sign. Similarly, at its lowest speed, the
switch will cease to move any further.
Note: It is recommended the pump be set at
its highest speed during assembly and later
adjusted to a lower setting if desired. Be sure
to unplug the pump before adjusting the
speed setting.
3. Insert the tube (located on the bottom of
fountain top) into the pump.
4. Fill base with tap water to 1" from top. We
recommend using distilled water to prevent
mineral build up.
5. Set the fountain top onto the base by notch
so it sits level.
6. Attach the A/C adaptor jack to the base power
cord. DO NOT plug into outlet at this time.
7. Set the fountain on a level, waterproof
surface.
8. Plug the cord into 120V household outlet.
The fountain is controlled by the switch
located on the power cord. If pump doesn't
operate, rotate in-line switch once to turn
"on" and once more to turn "off". Monthly
maintenance will add to your pump's life.
Note: Ensure that the electrical cord loops
below the electrical outlet to form a 'Drip
Loop'. (Figure 3) This will prevent water
from running down the cord into the
electrical outlet.
Figure 2
Figure 3
Drip Loop
4
9. Arrange the river rocks provided on each rock layer. (If splashing occurs, rearrange
rocks until there is no more splashing).
Figure 1
A. Fountain
Top
F. Lights
Tube
Notch
ON/OFF
Switch
B. Fountain base
C. River
Rocks
D. Pump
Fill with water
Cord Slot
E. Adaptor
5