Troubleshooting Guide - Oreck Revitalize FK50100 Serie Manual Del Usuario

If appliance is not working as it should, has been dropped, damaged, left outdoors or dropped into water, take it to a service center prior to
continuing use. Any other servicing should be done by an authorized service representative.
Problem Cause
Cleaner will not run • Power cord not firmly plugged into outlet.
• No voltage in wall plug.
• Blown fuse or tripped breaker.
Cleaner won't pick up • Dirty Water Tank is not installed correctly.
or has low suction • Dirty Water Tank is full.
• Dirty Water Tank is clogged.
• Air path is clogged.
Water escapes • Dirty Water Tank is full.
from Cleaner • Dirty Water tank is not installed correctly.
• Clean Water Solution Tank not installed properly.
!
WAR N IN G!
5. T ROUBLESHO OT I NG
Resolution
• Plug unit in firmly.
• Check fuse or breaker in home.
• Replace fuse/reset breaker in home
• Review Emptying your Dirty Water Tank (Pg. 14)
• Empty Dirty Water Tank.
• Clean Dirty Water Tank.
• Unclog air path/nozzle.
• Empty Dirty Water Tank.
• Review Emptying your Dirty Water Tank (Pg. 14)
• Review Clean Water Solution Tank Installation.
!
TO REDUCE THE RISK OF PERSONAL INJURY—UNPLUG BEFORE CLEANING OR SERVICING.