Installation; Adjustment Of The Door - Vestfrost FKG 410 Instrucciones Para El Uso

GB

Installation

See page A + B
Install the cabinet in a dry place and so that
it is not exposed to direct sunlight or any
other sour ce of heat.
Place the cabinet in a level position. This is
easily achieved by adjusting the adjustable
feet at the front edge of the base.
The cabinet may not rest against a wall on
its hinged side. When placing the cabinet
on a carpet or on a wooden floor you should
adjust it once more after some time as the
cabinet might settle in soft foundati ons.
If you want to build the appliance into a
cupboard you must consider 3 factors:
1. There must be space above the appli-
ance in order to make the cooling system
work satisfactorily.
2. When the door is opened the appliance
takes up more room in the width and
therefore the door must either be placed
outside the cupboard or there must be
a space of at least 1,5 cm at the hinge
side.
3. The distance to the wall at the hinge side
must be of a sufficient size.
.
Furthermore it is possible to build together
the appliance and another cabinet.
It is safest to place the earthed wall socket
abo ve the appliance and at least 2.0 m
above the floor. Any local installation rules
for appliances of this kind must be ob-
served.
During a storm the electricity supply might
be cut off.
You should be aware of this when installing
the appliance in weekend cottages or else-
where where you would not immediately
observe that the power has been cut off.
Construction and details in the accessories
are subject to alter ation without previous
notice.
Adjustment of the
door
See fig. 2
Adjust the door position by loosening the
2 screws slightly and displacing the door
hinge in the fittings.
Thighten the 2 screws, when the door fits
correctly.
4
Fig. 2