3.8 Partition for Paper Roll
Set the partition to the width of the paper roll you are loading.
The partition is set at the factory to the position shown below.
For 3-inch type: 80-mm wide paper roll
For 2-inch type: 58-mm wide paper roll, 60-mm wide paper roll
1.
Turn off the power.
2.
Pull the cover open lever forward and open the pap er cover.
3.
Set the partition in a slot that matches the size of the paper roll you are using.
However, to use an 83-mm wid e pap er roll, remove the partitio n.
Or, when you are using a 60-mm wide paper roll with the 2-inch type, remove the
partitio n installed for 58-mm.
4.
Refer to "5.3 Manu al Setting of Memory Switches" to change the paper width
settings.
CAUTION
Make sure the partition is not slanted when setting it for 58-mm or 60-mm paper rolls.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
(2-sheet partition installed.)
*1
— 35 —
V10 CONSUMIBLES S.L.
Partition
*1
*2
Notes:
*1: 2-inch type (58/60 mm)
*2: 3-inch type (80/83 mm)