Replacing The Lamp - Christie LW502 Guía De Preparación

Replacing the lamp

A lamp has a finite product life. Using the lamp for long periods of time could cause
the pictures to darken or the color tone to turn poor. Each lamp has a different
lifetime, and some may burst or burn out soon after you start using them.
New lamp preparation and early replacement are recommended. To prepare a
new lamp, contact your dealer and indicate the lamp type number.
Type number : 003-005852-01 (DT01935)
1.
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes.
2.
Prepare a new lamp. If the projector is mounted
with specified mounting accessories, or if the lamp
has broken, also ask the dealer to replace the lamp.
If replacing the lamp by yourself, complete the following
procedure.
3.
Loosen the screw (marked by arrow) of the lamp cover
and then slide down and lift the lamp cover to remove it.
4.
Loosen the three screws (marked by arrow) of the
lamp, and slowly pull the lamp out by the handles.
Never loosen any other screws.
5.
Insert the new lamp, and firmly retighten the
three screws of the lamp loosened in the
previous step to lock it in place.
6.
While putting the interlocking parts of the lamp
cover and the projector together, slide the lamp
cover back in place. Firmly fasten the screw of the
lamp cover.
7.
Turn the projector on and reset the lamp time
using the LAMP HOURS item in the SETUP menu.
(1) Press the MENU button to display a menu.
(2) Point at the ADVANCED MENU in the menu using the
▼/▲ button, then press the ► button.
(3) Point at the SETUP in the left column of the menu using the ▼/▲button, then
press the ► button.
(4) Point at the LAMP & FILTER using the ▼/▲button, then press the ► button.
(5) Point at the LAMP HOURS using the ▼/▲ button, then press the ► button.
A dialog appears.
(6) Press the button to select "OK" on the dialog. The lamp time is reset.
►
CAUTION ►Do not touch the interior of the projector, while the lamp is
removed.
NOTE • Reset the lamp time only when you have replaced the lamp, for a
suitable indication about the lamp.
LW502/LWU502/LX602 Setup Guide
020-001101-03 Rev. 1 (02-2018)
Lamp cover
3
4, 5
Handles
6
16