INSTALLATION INSTRUCTIONS
ADA ACRYLIC SHOWER BASES
MODELS: A8007D-FCO, A8009D-FCO
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.)
Local building codes vary by location. Observe all local plumbing and building codes.
TOOLS & MATERIALS REQUIRED....
TOOLS:
• Level
• Pencil
• Square
• Tape Measure
• Pipe Wrench
Note on ADA requirements:
This shower base is in compliance with the 2010 ADA Standards for Accessible Designs Guidelines.
The shower base must be installed according to these instructions to be in compliance. There are other
requirements in addition to the shower base design and installation instructions for a compliant shower
system. It is the installer's responsibly to understand and conform to these requirements.
NOTE: Read instructions completely before proceeding with installation.
The opening dimensions should be at least 1/8" (3mm) larger than dimensions shown.
For the best fit, the opening measurements should be verified against the actual shower base received.
CO
16-1/2"
(419mm)
34"
(864mm)
All product names listed herein are trademarks of AS America, Inc. unless otherwise noted.
© AS America, Inc. 2017
• Slip Joint Pliers
• Screw Driver
• Standard Woodworking Tools
• Personal Safety Equipment
• Caulking Gun
A8007D-FCO
32"
(813mm)
1"
(25mm)
1-1/8"
(29mm)
MATERIALS:
• Silicone Sealant
• Drop Cloth
• Mortar Mix or Grout
64"
(1626mm)
3-3/8"
(86mm)
FRONT
TOP VIEW
13/16" (21mm)
THRESHOLD DEPTH
3/16" (5mm)
BELOW THRESHOLD
RIGHT SIDE
755472-100