Battery Charging And Alerts; Vibration Alert Settings; Out Of Range - LG HBS-510 Manual Del Usuario

Battery Charging and Alerts

Open the Charging port cover and connect the charger to the Charging port.
Press and hold the Volume down button for two seconds to check the battery level using voice
prompts and the Indicator lamp.

Vibration Alert Settings

Out of Range

If the device connected to the product is out of effective communication range (33 feet/10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically reconnects
to the device. If the device is not automatically reconnected, Press the MFB on the product to connect
to it manually.
If a device that is not in use goes out of communication range when multiple devices are connected,
the product vibrates and a voice message indicates that the connection is lost. In this case, the
automatic reconnection function is not supported.
Indicator Lamp
Battery Status Charging
Battery Status Sufficient
Blue flashes
Indicator Lamp
three times
The vibration alert is automatically set to the ON position when you
turn on the power.
To activate or deactivate the vibration setting, press and hold the
Volume up button for two seconds.
NOTE: When vibration is turned off, the HBS-510 will not vibrate
when receiving an incoming call or when it is out of
communication range.
Red Purple
80%
Normal
Purple flashes
three times
Blue
Completed
Insufficient
Red flashes
three times
9