Vicks EasyFill VUL570 Serie Manual De Uso Y Cuidado página 4

Setting Up Your Humidifier
Installing the Demineralization Cartridge - (Optional)
Step 1
Step 2
If you live in a hard water area, the use of distilled water or a demineralization cartridge with tap water
will help minimize the production of white dust. A Protec Demineralization Cartridge (Model # TWT500)
is included in some models. To install it:
1.
Remove Tank Cover.
2.
Press the Cartridge into the recessed area inside the Water Tank and twist to secure.
3.
Fill Tank with water according to instructions in the next section, Filling/Refilling the Water Tank.
Note: With a new, dry cartridge, there may be a delay of a few minutes while the water begins to
pass through the cartridge.
For best results, replace your Demineralization Cartridge every 20-30 fillings, or when you begin
to notice white dust forming. For your convenience, write the month and day you installed the new
cartridge on the top with a permanent marker.
To replace, twist the Cartridge and lift to remove. Dispose of in household trash. Replace with a new
Protec Demineralization Cartridge (Model # TWT500). (Not available in Canada).
Filling/Refilling the Water Tank
This humidifier holds a maximum of 1.25 gallons (4.7 liters) of water.
The Tank Cover is removable. You can fill the Tank with the Cover in place or with the Cover removed.
Be sure to replace the Cover before using the humidifier to keep objects and debris out of the water.
The Tank can be filled in two ways:
Option 1: At the Humidifier Option 2: At the Sink
Option 1 Option 2
Both filling options can be performed with or without the Tank Cover in place.
Note: Ensure the Float Paddle has been placed correctly in the Reservoir before filling.
See Float Paddle Installation instructions if necessary
Manufacturer will not accept responsibility for property damage caused by water spillage.
6
(Continued)
Step 3
Filling/Refilling The Water Tank
Option 1: To Fill Tank at the Humidifier
Step 1 Step 2
1.
Pour cool water from a pitcher or jug directly into Water Tank.
2.
Fill to the MAX line marked on the outside of the Tank or to the MAX indicator on the
Tank Cover. Replace the Tank Cover if it was removed for filling.
Option 2: To Fill Tank at the Sink
Step 1 Step 2
1.
Grasp Tank Handle and lift Water Tank to remove from Base. Carry Tank to sink.
2.
Fill Tank with cool water to the MAX line marked on the outside of the Tank or to the MAX
indicator on the Tank Cover. Replace the Tank Cover if it was removed.
NOTE: The Tank should be carried using two hands; one hand on the Handle located on top of the
Tank and other hand supporting the bottom of the Tank.
3.
Carry Water Tank back to humidifier.
4.
Replace the full Tank on the Base.
CAUTION: Use care when handling Water Tank to avoid unnecessary impact. Banging
or dropping the Water Tank could result in damage to the Tank that may cause leaking.
(Continued)
Step 3
Step 4
$
7