Installation Of Downlight Assembly - Emerson AIRA ECO Manual Del Usuario

8. Installation of Downlight Assembly

8.1
Remove one of the three #6-32 x 3/8" truss head screws
with lockwashers from the fan motor assembly (Figure 23).
Retain the screw for future installation.
Loosen the other two screws several turns.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the fan motor assembly and the light fitter
housing.
Spare #6-32 x 3/8" truss head screw with lockwasher is
provided in parts bag if needed.
8.2
Pass the fan motor assembly's black and white leads
through the center hole of the light fitter housing.
Install the light fitter housing onto the fan motor assembly
by aligning and engaging the keyhole slots of the light fitter
housing with the loosened screw heads on the fan motor
(Figure 24).
Rotate the light fitter housing clockwise to engage the two
loosened screws.
With the light fitter housing locked into position, tighten the
two previously loosened screws.
Reinstall the #6-32 x 3/8" truss head screw with
lockwasher (previously removed) into the light fitter
housing (Figure 24).
FAN MOTOR
ASSEMBLY
Figure 23
ROTATE LIGHT FITTER HOUSING CLOCKWISE
TO ENGAGE THE TWO LOOSENED SCREWS
LIGHT FITTER
HOUSING
Figure 24
14
REMOVE ONE #6-32 x 3/8"
TRUSS HEAD SCREW
WITH LOCKWASHER
REINSTALL ONE #6-32 x 3/8"
TRUSS HEAD SCREW WITH
LOCKWASHER
E.T.L. Model No.: CF985