Installing The Hanger Ball/Downrod Assembly (Standard) - Emerson LED PRO Serie Manual Del Usuario

4. Installing the Hanger Ball/Downrod Assembly
4.1
Pass the 80" Motor Wires through the opening in the
Ceiling Cover.
Be sure the Cover is oriented correctly (Figure 2).
4.2
Separate, untwist and unkink the Three Motor Wires.
Route the Motor Wires through the Hanger Ball /
Downrod Assembly (Figure 3).
(For Standard Mounting)
Figure 2
Figure 3
6
THREE 80" MOTOR
WIRES
CEILING
COVER
THREE 80" MOTOR
WIRES
HANGER BALL/
4.5" DOWNROD
ASSEMBLY
U.L. Model No.: 52-ANT