Black and Decker ST4500 Manual De Instrucciones página 5

WARNING:
Ensure the
trigger switch is not engaged to
reduce the risk of starting the
appliance accidentally.
A cord retainer is incorporated into the
rear of the handle on the power head.
• Near the end of the extension
cord, fold the extension cord to
create a loop.
• Feed the loop into the cord
retainer housing (A) as shown in
Figure 5.
• Hook the loop onto the cord
retainer (B) so it rests in the cord
retainer as shown in Figure I.
• Plug the extension cord into the
power head.
OPERATING INSTRUCTIONS FOR CATALOG #
ST4500 BUMP FEED TRIMMER
LINE FEED
Your trimmer uses .065 in. (1.65 mm) diameter, ROUND nylon
line to cut grass and weeds quickly and easily. Cutting line will wear
faster and require more feeding if the cutting or edging is done along
sidewalks or other abrasive surfaces or heavier weeds are being
cut. As you use the trimmer, the string will get shorter due to wear.
Gently bump the unit on the ground and the line will feed.
CAUTION:
ALWAYS USE EYE PROTECTION.
5
A
6
B
CAUTION:
Inspect area to be trimmed and remove any
wire, cord, or string-like objects which could become entangled in the
rotating line or spool. Be particularly careful to avoid any wire which
might be bent outwardly into the path of the tool, such as barbs at
the base of a chain link fence.
1. Angle unit as shown in figure 7.
2. Slowly swing trimmer side-to-side
as shown in figure 8.
5
7
(10° TO 30°)
8