Operation - Festo DMES Serie Instrucciones De Utilizacion

DMES
8

Operation

Warning
Moving masses can cause personal injury or
material damage (crushing).
S Within the positioning range, make sure
that
nobody can place his/her hand in the path
of the moving parts (e. g. by means of
a protective guard),
there are no foreign objects present.
It should not be possible to touch the DMES
until the mass has come to a complete
standstill.
Installation in a vertical or diagonal position:
Warning
Risk of personal injury and material damage
In the event that the spindle nut breaks (e. g. due to wear) inside the DMES, the
work mass will fall down.
S Check whether additional external safety measures against spindle nut
breakage are necessary (e. g. toothed latches or moving bolts).
S Replace the spindle nut and where necessary the spindle if the permitted
axial play is exceeded.
If the motor is turned out of position:
Note
The motor MTR−DCI is turnable è Assembly
instructions for the motor mounting kit aJ .
Turning the motor causes the reference po
sition to be lost.
S Start homing to reference the positioning
cycle anew è chapter Commissioning".
Festo DMES 0909c English
Fig. 19
aJ
Fig. 20
33