Operation; Switching On And Off; Grinding; Maintenance And Care - Parkside PTSG 140 A1 Traducción Del Manual De Instrucciones Original

Lijadora de disco
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55

Operation

Switching on and off
NOTE
Before first use, allow the sanding paper
to run without a load at top speed for about
5 minutes. Keep out of the danger area.
To switch the appliance on, plug the mains
plug
into a wall socket and press the on/off
switch
"I".
Now set the required sanding paper speed
using the speed control
appliance. The speed is infinitely variable.
To switch the appliance off again press the on/
off switch
"0" and pull the mains plug
out of the power socket.

Grinding

The arrow on top of the appliance ( ) shows you
the sanding disc
rotation direction (in this case,
anticlockwise).
The sanding speed can be adjusted using the speed
control
on the side of the appliance. This allows
you to process the material optimally according to
your requirements.
WARNING!
HAZARDOUS WORKING AREA: The grey
working area of the grinding wheel. Do not
work in this area (see fig. A).
Safe
Danger!
Fig. A
PTSG 140 A1
on the side of the

Maintenance and care

Ensure that the appliance has been disconnected
from the power in order to prevent it from being
accidentally switched on during the replacement
process and causing injuries.
The appliance is maintenance-free.
Always clean the appliance directly after com-
pletion of work.
Use a dry cloth to clean the housing. Under no
circumstances should you use fuel, detergents,
solvents or abrasive cleaners.
Keep the ventilation openings free of obstruc-
tions at all times.
Remove any sanding dust stuck to the appliance
with a brush.

Disposal

The packaging is made from environmen-
tally friendly material and can be dis-
posed of at your local recycling plant.
Do not dispose of power tools in
your normal household waste!
In accordance with European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment and
its integration into national law, used power tools
must be disposed of separately and recycled in an
environmentally friendly manner.
Your local community or municipal authorities
can provide information on how to dispose of the
appliance.
GB │ IE
 17
Tabla de contenido
loading

Tabla de contenido