Alliance Laundry Systems S Serie Instrucciones De Funcionamiento Y Programacion página 26

Programming
Cycle Programming
3. Fill 1–Fill 5 segments only. If the spray
rinse SETUP option is enabled, use the Up
or Down key to select either "SRIN"
(spray rinse) or "dRIN" (dilution rinse).
Press the Start key.
Note: Do not program spray rinse steps for
machines not equipped with spray rinse.
4. Use the Up or Down key to select the
desired segment time. Set this value to
zero to skip the segment. Press the
Start key.
Note: If the spray rinse SETUP option is
enabled and "SRIN" was selected in step 3, the
computer will skip to step 12.
Note: The computer does not count down the
remaining cycle time during fills, drains, or
prior to first achieving the programmed heat
temperature when heating. The computer
resumes counting down cycle time once the
programmed fill level is reached, when the
machine has drained, and after a programmed
heat temperature is reached.
24
(Continued)
5. Use the Up or Down key to select the
desired fill temperature. See the following
table for fill options.
Fill Temperature Options
Display
CFIL
HFIL
bFIL
6. Press the Start key.
7. Use the Up or Down key to select the
desired fill level. See the following table.
Water Level Options
Display
LOLE
HILE
Note: If "FLUS" is selected for a prewash
segment, this selection will be skipped for that
segment. The display will skip to step 9 in the
programming process.
8. Press the Start key.
Fill Type
Cold fill
Hot fill
Warm fill
Fill Level
Low Level
High Level
F232087