Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Programming
Setup Mode
(Continued)
To enter SETUP mode, press the Stop key
while the display is showing the temperature in
the sump. Once in SETUP mode, use the Up or
Down key to change the selected option. Use
the Start key to accept the selected option and
move on to the next one. Press the Stop key to
exit SETUP mode.
Degrees Displayed in Fahrenheit or
Celsius
This SETUP option affects the programming
and display of all temperatures. If "FAr" is
selected, all temperatures will display in
Fahrenheit. If "CEL" is selected, all
temperatures will display in Celsius.
Acceptable ranges for programmable
temperatures are 75°F–200°F or 25°C–93°C.
Spray Rinse and Supply 4 Enabled
This SETUP option allows the use of the spray
rinse feature on models equipped with spray
rinse and allows the selection of Supply 4 and
Supply 7 (Supply 3 and Supply 4 combined) in
cycle programs. This is the default SETUP
option for standard models. The display will
show either "SRIN" or "HEAT." Use the Up or
Down key to change the selected option to
"SRIN" to select this option. When "SRIN" is
selected, supply 4 is automatically enabled,
and no further SETUP options are
programmable. Press the Stop key to exit
SETUP mode.
Auxiliary Heat and Spray Rinse
Enabled
This SETUP option allows the use of both the
auxiliary heat and spray rinse features on
22
models equipped with spray rinse and
auxiliary heat. This is the default SETUP
option for models equipped with auxiliary
heat. The display will show either "SRIN" or
"HEAT." Use the Up or Down key to change
the selected option to "HEAT" to select this
option. Press the Start key. The display will
show either "SRIN" or "SUP4." Use the Up or
Down key to change the selected option to
"SRIN" to select this option. Press the Stop
key to exit SETUP mode.
Auxiliary Heat and Supply 4 Enabled
This SETUP option allows the use of the
auxiliary heat feature on models equipped with
auxiliary heat and allows the selection of
Supply 4 and Supply 7 (Supply 3 and Supply 4
combined) in cycle programs. This is the
default SETUP option for models not equipped
with spray rinse. The display will show either
"SRIN" or "HEAT." Use the Up or Down key
to change the selected option to "HEAT" to
select this option. Press the Start key. The
display will show either "SRIN" or "SUP4."
Use the Up or Down key to change the
selected option to "SUP4" to select this option.
Press the Stop key to exit SETUP mode.
Note: Auxiliary heat is enabled for models
not equipped with spray rinse or auxiliary heat.
Do not program heat steps for such models.
F232087
Capítulos
Tabla de contenido
