Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation Instructions:
4
The TurboChef 30˝ Double wall speedcook oven
specs & Dimensions
DIMensIons
Overall Oven
Height
Width
Depth
Depth from Wall
with top door open
with bottom door open
Weight
Top Oven Cavity
Height
Width
Depth
Cooking Space
Bottom Oven Cavity
Height
Width
Depth
Cooking Space
Cabinet
Width (minimum)
30.00˝
Rough Wall Opening
Height (min/max)
48.875˝
Width (min/max)
28.50˝
Depth (minimum)
24.00˝
Dimensions in parentheses are in centimeters unless otherwise noted.
Due to the overall depth of the oven frame (23.9˝(60.7 cm)), the
power supply line location shown in the illustrations on page 5 (high
or low conduit box) must be adhered to in order to obtain a proper fit
in the cabinet.
Specifications are subject to change without notice.
eleCTrICal speCIfICaTIons
Electrical Supply Requirements:
50.25˝
(127.6)
Single Phase, 208 VAC, 60 Hz, 50 Amps
Model: TDO30 * 208
30.00˝
(76.2)
23.90˝
(60.7)
Single Phase, 240 VAC, 60 Hz, 50 Amps
Model: TDO30 * 240
4.25˝
(10.8)
17.50˝
(44.5)
" * " Indicates a two letter code – OR, RD, BU, CH, IV, WH, or SS –
which refers to the oven door color.
19.50˝
(49.5)
410 lbs.
(186 kg.)
Connection:
between the oven and conduit box. Connectors are supplied by
installation electrician.
Total Connected Power:
12.00˝
(30.5)
24.00˝
(61.0)
InCluDeD aCCessorIes
15.00˝
(38.1)
1 oven rack for top Speedcook oven
2.5 cubic feet
2 oven racks (1 standard/1 roller rack) for bottom oven
Meat probe for the bottom oven
TurboChef Cookbook
15.50
(39.4)
proper CabIneT preparaTIon
24.00˝
(61.0)
Cabinets should be cut according to the dimension supplied
17.50˝
(44.5)
under Specs & Dimensions. If the oven is being installed near a
wall or door, there should be at least ∑˝ space between the wall/
3.77 cubic feet
door and the side of the oven door.
Base cabinet support must be able to support the oven's weight
(76.2)
(410 lbs.). TurboChef strongly recommends a solid base as shown
in the illustrations in Figure 6.
(124.1)
TurboChef recommends using standard 2 x 4 support posts with
(72.6)
a minimum of ∆-inch solid base to support the oven. Support
(61.0)
posts should be level with the floor line and well-secured to the
base of the cabinet.
If necessary due to a low or high conduit box, a 2-inch diameter
hole should be drilled in the appropriate area to allow the power
cord to reach the power source. Refer to Figure 6.
Should you have any questions or concerns about how the
cabinets are built, please contact TurboChef Customer Service
866.44serve (866.447.3783) before installing the oven.
Unit includes a 5½ foot flex conduit to be used
50 Amps
Tabla de contenido
