Before Startup; Unpacking; Start Up - Kärcher HD 3.0/20-4 M Ea Manual De Instrucciones

Notes about the ingredients
(REACH)
You will find current information about
the ingredients at:
www.kaercher.com/REACH

Before Startup

Unpacking

Check the contents of the pack be-
–
fore unpacking.
In case of transport damage inform
–
vendor immediately.
Check oil level
Read the oil level display when the

device is not running. The oil level
must be above the two pointers.
Activate deaeration of oil container
Unscrew the fastening screws of

the device hood; remove the device
hood.
Cut off tip of oil container cover

Fasten the device hood.

Attaching the Accessories
Note: The EASY!Lock system joins
components with a quick-fasten thread
solidly and securely with just one turn.
1.
Insert the high pressure nozzle onto

the spray lance.
Install union nut and hand-tighten it

(EASY!Lock).
8
2.
Join the spray lance with the trigger

gun and tighten until hand-tight
(EASY!Lock).
Join the high-pressure hose with

trigger gun and high-pressure con-
nection of the appliance and tighten
until hand-tight (EASY!Lock).
WARNING
Risk of injury! Appliance, accessories,
supply lines and connections must be
in fault-free condition. If they are not in
a perfect state then the appliance must
not be used.
Electrical connection
DANGER
Danger of injury by electric shock.
It is imperative to connect the appli-
–
ance to the electric mains by means
of a plug. It is forbidden to perma-
nently connect the appliance to the
power supply. The plug serves for
the disconnection from the mains.
The plug and coupling of the exten-
–
sion cable used must be watertight.
Use the extension cord that has an
–
adequate cross-section (see "Tech-
nical Data") and unwind it fully from
the cable drum.
For connection values, see type plate/
technical data.
GFCI INSTRUCTIONS
STEP 1: Plug the Ground Fault Cir-
–
cuit Interrupter (GFCI) into a work-
ing outlet.
STEP 2: Press ''TEST'', then press
–
''RESET'' to assure proper connec-
tion to power.
Note: The actual appearance of the
GFCI may be different from this illus-
tration.
– 6
EN

Start up