Hergom MALLORCA Instrucciones Para Instalación, Uso Y Mantenimiento página 44

Diameter approx. 350 mm
Slide the interior pipe
through the mouth of the
support piece once it has
Assembly instructions
THE MALLORCA MODEL
STANDARD SUPPORTED ASSEMBLY
Average height of the premises 2.80 metres
ANCHORING THE PIPE SUPPORT PIECE
1
Make the hole for the
chimney stack in the
roof.
Heat resistant join
drill the holes for
the pipe support
Pipe support
Select the type of anchorage.
As a general rule of safety and for the suspended version
(without glass panes) it is specially advised to use a screw
which goes through to the wrought iron plate creating a
"sandwich" effect.
STEPS FOR POSITIONING THE PIPE
Leave sufficient space so that
you can position the chimney.
2
Mark out and
Position the pipe and provisionally fasten
it using the capscrews. The two sealing
capscrews are positioned at the end of
Sealing capscrews
M6x12 DIN914
Capscrews
M6x12 DIN914
44