Hergom MALLORCA Instrucciones Para Instalación, Uso Y Mantenimiento página 54

Allign the female
tube with the male
tube (fixed) sliding
the interior "pegs "
in the grooves of the
male tube (Fig 1).
Three holes have been drilled in the
anchorage area for the following jobs:
1- Drill a hole with a 5mm bit (Fig 3)
2- Make a M6 groove (Fig 4)
3- Screw in a M6x12 DIN914 capscrew
(Fig 5)
Peg welded in
the interior of
the female tube
Turn the tube in a horizontal direction as far
as the groove of the tube will allow.
Sealing M6x12 DIN914 capscrews
54
Upper view of the tube
showing the three "pegs"
which are used to hang
the tube