Operation - American Hometec AHQ-TC10 Manual De Instalación Y Funcionamiento

hot water close to the temperature you set. How close to the
temperature you set depends on how close you have installed the unit to
the fixture. Regardless of varying incoming water temperature, this unit
will supply hot water at a constant temperature that is close to the
temperature you set (or factory default setting at 104°F if you have not
changed the default temperature setting), provided the hot water
application is within the unit's capacity. The power settingas follows:
Power setting selection (Fig 4)
Power setting
Power setting selection (Fig 4)
Power setting
Power setting selection (Fig 4)
Power setting
Register the unit for warranty purposes at

Operation


The heater supplies hot water at a constant temperature when it is
operated within its designed capacity. The heater automatically adjusts its
power consumption to match the demand of hot water so that you enjoy
maximum energy savings.

Do not block the discharge of the pressure relief valve (if installed).

This unit is designed with safety features to protect against scalding.
Thefollowing required information is provided to the consumer:
WARNING! Hot water can produce 3
seconds at

The unit is not designed to withstand freezing temperatures during
standby. Attempting tooperate the unit while frozen will cause irreversible
damage.

A flow rate of > 0.5 gpm is required to enable the unit.
Power Adjustment Range AHQ-TC10
Setting 1
9.5 kW
Power Adjustment Range ACQ-TC10Y
Setting 1
9.5 kW
Power Adjustment Range ACQ-TB03X
o o
140 F / 60 C andin 30 seconds at 130
Setting 2
7.2 kW
Setting 2
8.3 kW
Setting 1
3.4 kW
www.americanhometec.com
rd
degree burns in 6
12
Setting 3
4.8kW
Setting 3
5.5kW
Setting 2
2.4 kW
o o
F / 54 C