Enlaces rápidos

Canon Inkjet Office All-In-One
Equipo multifunción para oficina Canon Inkjet
Getting Started
Read Me First
Guía de inicio
Léame en primer lugar
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
Asegúrese de leer este manual antes de usar el equipo. Consérvelo a mano para utilizarlo como referencia en el futuro.
series
ENGLISH
ESPAÑOL
Tabla de contenido
loading

Resumen de contenidos para Canon PIXMA MX882 Serie

  • Página 1 ENGLISH ESPAÑOL Canon Inkjet Office All-In-One Equipo multifunción para oficina Canon Inkjet series Getting Started Read Me First Guía de inicio Léame en primer lugar Make sure to read this manual before using the machine. Please keep it in hand for future reference.
  • Página 2: Symbols Used In This Document

    ■ Contents ■ Symbols Used in This ■ Contenido ■ Símbolos utilizados Document en este documento 1 Preparation P.4 1 Preparación P.4 2 Install the Print Head P.10 2 Instalación del cabezal de impresión P.10 Prohibited actions. Acciones prohibidas. 3 Install the Ink Tanks P.13 3 Instalación de los depósitos de tinta P.13 4 Align the Print Head P.16 4 Alineación del cabezal de impresión P.16...
  • Página 3 ■ Machine Installation USB Connection Network Connection Flow Conexión de red ■ Flujo de instalación Wireless Connection Wired Connection Conexión USB Using from Additional del equipo Computers Conexión inalámbrica Conexión por cable (when the machine is already connected to the network and you want to add computers from which to use the machine) Machine Preparation...
  • Página 4: Solución De Problemas

    On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. Some parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 52. Los manuales en pantalla se pueden ver en un ordenador.
  • Página 5 ■ Devices Required for Wireless/Wired Connection ■ Dispositivos necesarios para la conexión inalámbrica/por cable When using the machine over a wireless/wired connection, the following devices are required depending on the connection method. Cuando el equipo se utilice mediante una conexión inalámbrica/por cable, se necesitarán los dispositivos siguientes en función del método de conexión. Wireless Connection Wired Connection Conexión inalámbrica...
  • Página 6 Remove all orange tape and protective materials from the inside and • Do not install the machine where an object may fall on it. In addition, outside of the machine. do not place any object on the top of the machine. It may fall into the machine when opening covers, resulting in malfunction.
  • Página 7 Do not connect the power cord yet. Make sure all the following items are supplied. Some accessories (1) are stored within the Paper Output Tray (A). Open the Paper Output Tray to remove them. 1. Print Head 6. Setup CD-ROM (containing the drivers, •...
  • Página 8 Connect one end of supplied telephone line cable (B) to the lower connector labeled "L" on the machine, and then connect the other Use FAX features? end to the telephone jack on the wall (C). Go to • If you cannot send faxes after installing the machine, check the following: 1.
  • Página 9 Only when connecting a telephone or an answering machine Sólo al conectar un teléfono o un contestador automático Remove the Cap (D) (1), then connect a telephone or an answering machine with Insert the power cord into the connector on the left side at the back of the machine the telephone line cable (2).
  • Página 10 Press the ON button (F). Use the { or } button (G) on the Operation Panel to select the When this screen is displayed, press language for the LCD (Liquid Crystal Display) (H), then press the the OK button, then proceed to the next •...
  • Página 11: Cuando Sea Necesario Desconectar El Equipo

    When it is necessary to turn off the machine Cuando sea necesario desconectar el equipo • Before removing the power plug, make sure that all the lamps on the Operation Panel are not lit. Removing the power plug while any of the lamps on the Operation Panel is lit or flashing may cause drying and clogging of the Print Head, resulting in poor printing.
  • Página 12 1. Make sure the Document Cover (A) is closed, then lift to open the Scanning Unit The Print Head Holder (F) moves to the installation (Cover) (B). position. 2. Fix it with the Scanning Unit Support (C). If the Print Head Holder does not move, make sure that the machine is turned on.
  • Página 13 Firmly lift the part (G) of the Print Head Lock Lever in the Print Head Holder until it Remove the Print Head from the silver Remove the orange protective cap. stops. package. The Print Head Lock Lever may feel heavy. •...
  • Página 14 Tilt the Print Head forward and set it in place as shown. Hold the Print Head Lock Lever firmly and lower it completely. • Do not knock the Print Head against the sides of the holder. • Install in a well-lit environment. •...
  • Página 15 1. Remove the orange tape completely. 1. Hold the ink tank with the orange Hold the ink tank by its sides and slowly twist the protective cap (A) pointing up. orange protective cap 90 degrees horizontally to 2. Remove the protective film remove it off.
  • Página 16 Tilt the ink tank, then insert it under the label and Press the PUSH mark on the ink tank firmly until it Install all the other ink tanks in the same way against the back end of the slot. clicks. according to the color order indicated on the label.
  • Página 17 1. Lift the Scanning Unit (Cover) (E) slightly. Wait for about 4 minutes until the LCD changes as shown in the illustration, then proceed to the next step. 2. Fold the Scanning Unit Support (F) towards the left. Do not press the OK button yet. 3.
  • Página 18 Extend the Paper Support (A). Move the Paper Guides Load a sheet of supplied specialty paper (Matte Photo Paper MP- (B) to both edges. 101) in the Rear Tray (C). 1. Open the cover. Load paper in portrait orientation so that the cut corner (D) is at the top right. 2.
  • Página 19 Slide the left and right Make sure the Paper Press the OK button. When the pattern is printed, remove the paper. Confirm the above message, Paper Guides against Output Tray (E) is open. Print Head Alignment then proceed to the next step. both edges of the paper.
  • Página 20 With the machine, the paper source varies This section describes how to load plain paper in the Cassette. depending on the media type. For details on how to load specialty paper in the Rear Tray, refer to in “4 Align the Print Head” on page 16. Con el equipo, el origen del papel varía en función del tipo de soporte.
  • Página 21 Pull out the Cassette (E). Move the left Paper Guide (F) to Slide the front Paper Guide Load plain paper. the edge. (G) to align with the size of the Load paper with the printing side facing paper. down. The front Paper Guide will click and stop when it aligns with the corresponding mark of paper size.
  • Página 22 Align the paper to the right side of the Insert the Cassette slowly into the Confirm the message on the LCD, then press the OK button. Cassette (1), and slide the left Paper machine until it clicks into place. Guide completely against the left edge The copy standby screen is displayed.
  • Página 23 Depending on your needs, select one of the following three modes for receiving Read this section only when using faxes. You can change the receive mode after installation is complete. For details, the fax features. refer to "Setting the Receive Mode" in the on-screen manual: Basic Guide. En función de sus necesidades, seleccione uno de estos tres modos para If not using the fax features, go to la recepción de faxes.
  • Página 24 Responses to Calls in Each Mode Respuestas a llamadas en cada modo When a fax call arrives When a voice call arrives Si recibe una llamada de fax Si recibe una llamada de voz While the telephone's ringtone While the telephone's ringtone sounds, pick up the handset.
  • Página 25 Use the { or } button (C) to select a receive mode, Press the FAX button (A). Press the center FUNCTION button (B). then press the OK button. Button layout on the Operation Panel changes automatically depending on use. When the display changes, check the button The fax standby screen returns.
  • Página 26: Usb Connection

    Intended Use Connection Method Uso previsto Método de conexión • Connect to a computer with a USB cable. USB Connection Go to "8 Install the Software (USB Connection)" on page 25. Conexión USB Vaya a “8 Instalación del software (Conexión USB)” •...
  • Página 27 Do not connect the USB cable yet. For Spanish Users in the U.S.A. No conecte aún el cable USB. Para los usuarios de habla hispana en EE. UU. To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer’s hard disk.
  • Página 28 Easy-WebPrint EX If the USB cable is connected before the software is Easy-WebPrint EX installed Si el cable USB está conectado antes de instalar el software Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software.
  • Página 29 Windows 7/Windows Vista Click Run Msetup4.exe on the AutoPlay screen, then click Yes Windows XP or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. Haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe) en la pantalla Reproducción automática (AutoPlay) y, a continuación, haga clic en Sí...
  • Página 30 Click Easy Install. Click Install. Select Use the printer via USB, then click Next. The drivers, application software, and on-screen manuals are installed. Follow any on-screen instructions to proceed with the software installation. • If you want to select particular items to install, click Custom Install.
  • Página 31 USB Port If the Extended Survey Program If the serial number is not displayed on the registration screen, input the number found inside the machine. screen appears Puerto USB Si el número de serie no aparece en la pantalla de registro, Si aparece la pantalla Extended introduzca el que viene en el interior del equipo.
  • Página 32 Solution Menu EX starts. For Macintosh For Macintosh Solution Menu EX starts when clicking OK in the Canon It is necessary to restart the computer before scanning Solution Menu EX dialog. using the Operation Panel on the machine for the first time.
  • Página 33: Before Configuring Wireless Settings Antes De Configurar La Conexión Inalámbrica

    Before Configuring Wireless Settings Antes de configurar la conexión inalámbrica After confirming the connection, perform the following Make sure that the computer and access point or router are instructions to add (connect) the machine to the network. connected. Después de confirmar la conexión, siga las instrucciones Asegúrese de que el ordenador y del punto de acceso o del detalladas a continuación para agregar (conectar) router están conectados.
  • Página 34 Contraseña para evitar el acceso no autorizado a la red. You can retrieve your network key by using the Canon PIXMA Wireless Setup Assistant or the instructions which can be downloaded from the Canon support webpage (www.usa.canon.com/WirelessHelp).
  • Página 35 1. Press the Setup button (A). Use the { or } button (C) to select Yes, then press the OK button. 2. Use the [ or ] button (B) to select Wireless LAN setup. When wireless connection is enabled, the Wi-Fi lamp (D) lights blue. 3.
  • Página 36 Select Easy setup, then press the OK button. Select the access point name you wrote Make sure that one of the above screens is displayed, then press down on page 32, then press the OK the OK button. button. If the above screen is not displayed, go to on page 35.
  • Página 37 When the above screen appears, press the OK button. Enter the network key you wrote down on page 32, then press the Make sure that the left FUNCTION button (E). network key is correct, • If Failed to connect to the access point. appears, press the OK button, then press the left Press the center FUNCTION button (F) to switch character entry modes.
  • Página 38: Before Configuring Wired Settings Antes De Configurar La Conexión Cableada

    Before Configuring Wired Settings Antes de configurar la conexión cableada After confirming the connection, perform the following Make sure that the computer and router are connected. instructions to add (connect) the machine to the network. Asegúrese de que el ordenador y el router están conectados. Después de confirmar la conexión, siga las instrucciones detalladas a continuación para agregar (conectar) el equipo a la red.
  • Página 39 Remove the Cap (A), then connect a network device (router, etc.) with an Ethernet cable (B). 1. Press the Setup button (C). 2. Use the [ or ] button (D) to select Device settings. The Wired LAN Connector is located on the right side at the back of the machine. The upper port is for an Ethernet 3.
  • Página 40 Use the { or } button (E) to select LAN settings, then press the Select Change wireless/wired, then Select Wired LAN active, press the OK button. OK button. press the OK button. Next, read "11 Install the Software (Network Connection)" on page 39! Utilice el botón { o } (E) para seleccionar Configuración de LAN Seleccione Cambiar inalámbrica/ Seleccione LAN cableada activa (Wired LAN active)
  • Página 41 If the firewall function of your security software is turned on, a warning message computer when installing may appear that Canon software is attempting to access the network. If such a the supplied software. warning message appears, set the security software to always allow access.
  • Página 42 Windows 7/Windows Vista Click Run Msetup4.exe on the AutoPlay screen, then Windows XP click Yes or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. Haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe) en la pantalla Reproducción automática (AutoPlay)
  • Página 43 Click Easy Install. Click Install. If you select wireless connection on page 24 Select Use the printer with wireless LAN The drivers, application software, and on-screen connection, then click Next. manuals are installed. If you select wired connection on page 24 •...
  • Página 44 When the Printer Detection screen appears, click Next. • If the Printer Connection screen appears instead of this screen, the connection method is not correctly selected in − For Windows Click Cancel and start again from , then select the connection method, which you select on page 24, in −...
  • Página 45 On the Canon IJ Network Tool screen, select MX880 series in Printers, then click Next. • If the Check Printer Settings dialog box is displayed or the machine is not displayed in the Canon IJ Network Tool screen, refer to the printed manual: Network Setup Troubleshooting.
  • Página 46: Seleccione Canon Mx880 Series

    Macintosh computer. Windows users: read “Information” on page • The alphanumeric characters after Canon MX880 series is the machine’s Bonjour service name or MAC address. • If the machine is not detected, make sure of the following.
  • Página 47 Mac OS X v.10.4.11 When the Printer List window Click More Printers in the Printer Select Canon IJ Network in the pop-up Make sure that Canon MX880 series appears, click Add. Browser window. menu, select Canon MX880 series in is added to the list of printers.
  • Página 48 When the Register Printer and Scanner screen Select Canon MX880 series on the Click Next on the Register Printer and Scanner appears, click Register Scanner. Canon IJ Network Scanner Selector screen. EX screen, then click OK. Next, read “Information” on page 47!
  • Página 49 If the serial number is not displayed on the registration screen, input the number found inside the machine. Si el número de serie no aparece en la pantalla de registro, introduzca el que viene en el interior del equipo. Click Next. Follow any on-screen instructions to proceed with the software installation.
  • Página 50 It is necessary to restart the computer before scanning For Macintosh using the Operation Panel on the machine for the first Solution Menu EX starts when clicking OK in the Canon time. Solution Menu EX dialog. Remove the Setup CD-ROM and keep it in a safe place.
  • Página 51 Using the Machine from Additional Computers Now that the machine is setup on your wireless/wired connection, you can install the software and drivers on additional computers on the same network. Additional settings are not required. To add computers from which to use the machine, go to “12 Use from Additional Computers” on page 50. Uso del equipo desde ordenadores adicionales Una vez finalizado el proceso de instalación de la conexión inalámbrica/cableada del equipo, se puede instalar el software y los controladores en ordenadores adicionales de la misma red.
  • Página 52: Para Utilizar Desde Ordenadores Adicionales

    If the machine is already connected to a wireless/wired connection, it can be used from additional computers on the same network. Si el equipo ya está conectado a una conexión inalámbrica/por cable, se puede utilizar desde otros ordenadores de la misma red. To use from additional computers Computer from which the machine can be used currently Insert the Setup CD-ROM into the computer from which...
  • Página 53 To change to a wireless connection from a USB connection, start over from “9 Wireless Setup” on page 31 to set up a wireless connection. Para cambiar a una conexión inalámbrica desde una conexión USB, vuelva a empezar desde “9 Configuración inalámbrica” en la página 31 para configurar una conexión inalámbrica.
  • Página 54 Various application software are installed on the computer along with the drivers. You can print creative items by correcting/enhancing photos using the application software. For details on how to use the application software and the machine, refer to the on-screen manual. Junto con los controladores, en el ordenador se instala diverso software de aplicación.
  • Página 55 Load paper in the Rear Tray (A) in portrait orientation with Start Solution Menu EX from the Canon Solution the printing side facing up. Menu EX icon on the desktop (Windows) or on the Dock (Macintosh), click Photo Print, then click Photo Make sure that the Paper Output Tray (B) is open.
  • Página 56 Click Select Paper, then select the Click Layout/Print, then select a layout Click Print. Select a folder containing images, then select an image you want to print. Paper Size and Media Type settings for the image. If you are using Windows, printing will start. that match the loaded paper.
  • Página 57 Load A4 or Letter-sized plain Open the Paper Output Tray (B), then open the Place the document face-down and align it with the paper into the Cassette (A). Document Cover (C). Alignment Mark (D). If printing starts while the Paper Output Tray is closed, it will •...
  • Página 58 1. Close the Document Cover. • Close the Document Cover gently, holding it firmly, For the procedure to copy on paper 2. Press the COPY button (F). because it is heavy. other than plain paper, refer to The copy standby screen is displayed. •...
  • Página 59 Press the FAX button (A). Open the Document Tray (C), then move the Document Guides (D) to both edges. This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (B). • For details on supported documents and settings for image quality, density (brightness), etc., refer to the on-screen manual: Basic Guide.
  • Página 60 Use the Numeric buttons (E) to enter Press the Black button (F). Insert the document until a beep sounds, then slide the left and right Document the fax number. The fax is sent. Guides against both ends of the document. •...
  • Página 61 Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). 1. Press the Setup button (A). Use the { or } button (C) to select Yes, then press the OK button. 2. Use the [ or ] button (B) to select Wireless LAN setup.
  • Página 62 Select Other setup, then Select WPS, then press Select Push button method, then press the OK Press the OK button. press the OK button. the OK button. button. Seleccione Otra Seleccione WPS y, Seleccione Método de pulsador (Push button Pulse el botón OK. configuración (Other a continuación, pulse method) y, a continuación, pulse el botón OK.
  • Página 63 Press and hold the WPS button on the access point (for about When the above screen appears, press the OK button. 5 seconds), then press the OK button on the machine within 2 Next, read “11 Install minutes. the Software (Network •...
  • Página 64: Windows Vista

    5. Vaya a The machine supports “WCN-UFD.” • Canon assumes no responsibility for any damage or loss of data stored on your USB flash drive regardless of the cause even within the warranty period. Next, read “11 Install the Software •...
  • Página 65 (Based on ITU-T No.1 chart for US specifications and Canon FAX Wired LAN: 100BASE-TX/10BASE-T 356 mm (ADF) Standard chart No.1 for others, both in standard mode or Canon FAX Wireless LAN: IEEE802.11n/IEEE802.11g/IEEE802.11b *5 Standard chart No.1, standard mode.) Scanning resolution Color: Approx.
  • Página 66 Temperatura: de 0 a 40 °C (32 a 104 °F) Canal: 1-11 o 1-13 • Windows: Uninstall software bundled with the Canon inkjet printer before Humedad: del 5 al 95% (humedad relativa sin condensación) * El ancho de banda de frecuencia y los canales disponibles difieren upgrading from Windows Vista to Windows 7, then, install the bundled Suministro eléctrico...
  • Página 67: Especificaciones De Fax

    Necesario (Basado en el cuadro n.º 1 de ITU-T para especificaciones de EE UU Pantalla y en el cuadro n.º 1 del estándar de FAX de Canon para el resto, ambos en modo estándar). SVGA 800 x 600 XGA 1024 x 768 Resolución de fax...
  • Página 68: Ordering Information

    CLI-226Y 4549B001 CLI-226Y 4549B001 Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon Llame a 1-800-OK-CANON para localizar un distribuidor cercano o visite online store at www.shop.usa.canon.com la tienda en línea Canon en www.shop.usa.canon.com CANON U.S.A. INC.

Tabla de contenido