Switching On/Off And Standby; Display And Keyboard - Mettler Toledo IND930 Guia De Inicio Rapido

1.3.

Switching On/Off and Standby

The device can be switched on and off (shut down) or placed in standby as follows:
Switching on
Switching off (shutdown)
Only after the IND930 has been completely shut down or a corresponding message appears
may the power plug be pulled out or the voltage supply disconnected.
1.4.

Display and Keyboard

The IND930 is equipped with a back-lit, active color TFT display. The resolution of the IND930
is 1280 x 800 pixels at a size of 10.1" (25.9 cm). Weight information can be displayed in a
variety of formats, including single- or multi-scale display with or without a tare window.
All IND930 models feature an integrated touchscreen and can be operated exclusively via this
screen. In the display layout, the area at the very top is reserved for the system toolbar. It can
display general data as well as configurable status icons. Next is the weight display with all the
relevant weighing information. The middle section of the display is reserved for status messages
and special applications. The bottom section contains the areas reserved for DeltaTrac, and the
softkeys are arranged underneath.
Eight softkeys can be configured to enable a variety of integrated functions of the IND890,
ranging from setting the time and date to accessing specific memory tables, and including
special scale functions of the IND930.
Eight function keys are arranged below the screen. The operator can use these keys to navigate
through the setup options in the menu structure, and within setup and application screens.
30515558 | 00 | 01/2019
IND930
Insert the power plug. The IND930 will start up
automatically.
Press the Shutdown softkey and confirm the
prompt. The IND930 shuts down and reports "The
terminal can now be disconnected from the power
supply".
Status icons
Softkeys
METTLER TOLEDO IND930 Quick Guide CEU
Touchscreen display
3