Before Start Of Operation; Insert / Replace Battery; Starting Up The Device; Using The Angle Ruler - Powerfix Profi HG00962B Instrucciones De Utilización Y De Seguridad

Only use the same type of batteries /
¡ ¡
rechargeable batteries. Do not mix used
and new batteries / rechargeable
batteries.
Remove the batteries / rechargeable
¡ ¡
batteries if the product will not be used
for a longer period.
Risk of damage of the product
Only use the specified type of battery /
¡ ¡
rechargeable battery!
When inserting ensure the correct
¡ ¡
polarity! This is shown inside the battery
compartment!
Clean the contacts on the battery and
¡ ¡
in the battery compartment before
inserting!
Remove exhausted batteries /
¡ ¡
rechargeable batteries from the product
immediately.
˜ Before start of operation
˜ Insert / replace battery
Tip: Low voltage symbol
indicate a discharged / flat battery.
Tip: When changing the battery, the LCD display
experience faults. Remove the battery and insert it again.
Push the battery compartment button
¡ ¡
the battery receptacle
Remove the old battery.
¡ ¡
Insert battery receptacle containing the new battery into the
¡ ¡
battery compartment and ensure correct polarity (+ and –).
Make sure that the plus terminal points outwards.
Push the battery receptacle
¡ ¡
˜ Starting up the device
˜ Using the angle ruler
Press the ON / OFF button
¡ ¡
display
3
Loosen the locking knob
¡ ¡
showing in the LCD display
7
on.
4
(see fig B).
fully in (see Fig. B).
7
to switch the LCD
5
by turning it anti-clockwise.
2
3
may
3
, and then pull out
GB/MT 33