Installation Instructions - De Dietrich DTE1028X Modo De Empleo

EN

1 / INSTALLATION INSTRUCTIONS

• This grill uses 2.500 watts at its maximum position. Therefore,
before connection, make sure that your electric wiring system is
at least fitted with a 16-ampere fuse.
• The grill must be compulsorily connected to an earth.
• The plug must be accessible after installation.
• If the supply lead is damaged, it must be replaced by an
equivalent lead (H07RNF 3x1,5mm²) available from the after-
sales department.
• It is also necessary to provide a bipolar cut-off device in your
power supply circuit, where the opening of the contacts is more
than 3 mm.
•
Cooking with the grill necessarily involves the emission of
fumes. This factor will have to be taken into account when
choosing the place where your grill is to be fitted.
IT IS ABSOLUTELY IMPERATIVE TO LEAVE A SPACE OF AT
LEAST 5 CM BETWEEN THE BOTTOM OF THE GRILL AND THE
FIRST SHELF OF THE KITCHEN UNIT.
THE DISTANCE BETWEEN THE WALL AND THE REAR OF THE
APPARATUS SHOULD BE 5.5 CM.
WARNING : If the grill malfunctions in any way, unplug the
appliance or remove the fuse corresponding to the sector where the
gril is hooked up.
- 11 -