Technical Data; Noise Information; Vibration Information - Worx WX800 Traducción De Las Instrucciones Originales

1. AUXILIARY HANDLE
2. SPINDLE LOCK BUTTON
3. ON / OFF SWITCH
4. BATTERY PACK RELEASE BUTTON
5. BATTERY PACK*
6. WHEEL GUARD FOR GRINDING
7. DISC*
8. SPANNER
9. INNER FLANGE
10. OUTER FLANGE
11. CLAMP ADJUSTMENT NUT
12. SPINDLE
13. GUARD CLAMPING LEVER
14. WHEEL GUARD FOR CUTTING*
*Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type WX800 WX800.9 (800—819 -designation
of machinery, representative of Angle Grinder)
6
Charger voltage
Rated voltage
No load speed
Disc size
Disc bore
Spindle thread
Machine weight
**Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.
Lithium-Ion cordless angle grinder
WX800 WX800.9
100-240V ~ 50/60Hz
20V Max**
8600/min
115mm
22mm
M14
1.8kg
L : 86.8dB(A)
pA
L : 97 .8dB(A)
wA

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Surface
grinding or
abrasive
cutting off
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut.
The tool being in good condition and well
maintained
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
/ WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
1.54kg
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
Metal grinding disc
3 dB(A)
Wheel guard for grinding
Spanner
Vibration emission value
a = 4,300m/s
2
h,AG
Uncertainty K = 1.5m/s²
0
WX800
1
1
1
C or less
WX800.9
1
1
1
EN