Environmental Protection - Ryobi RAP1500G Manual De Utilización

Cepilladora de grosor con antirretroceso

Tabla de contenido

Idiomas disponibles

MAintEnAnCE

wARninG

Always make sure the power plug has been

removed from the mains power source before

making adjustments, lubricating or when doing any

maintenance on the product.

RE-SHARpEninG tHE blADE

If re-sharpening of blade is necessary, only re-sharpening

the wedged area is allowed.

lUbRiCAtion

■ The recommended lubrication for roller chains used in

medium to low operation is to simply wipe the chain

clean. When there is an excess build-up of dust or

wood shavings, etc., coat the chain with a light film

of oil but never pour the oil directly on the chain.

Over-oiling tends to hasten the collection of dust

and woodshavings and works them into members of

the chain leading to increased wear and premature

replacement. This applies to the speed reduction and

height adjustment chains as well as the elevation

screws.

■ The bearings on the cutterhead are factory lubricated

and sealed. They require no further attention.

pERioDiC MAintEnAnCE

■ The build-up of sawdust and other debris can cause

your machine to plane inaccurately. Periodic cleaning

is mandatory for precision planing and is highly

recommended.

■ Close fitting parts, such as the lockbars and the planer

cutterhead slots, should be cleaned with a brush;

remove clinging foreign matters. Then replace all parts

in their respective positions slightly dampened with oil.

■ Remove resin and other accumulations from feed

rollers and table with a non-flamable solvent.

tRAnSpoRtAtion AnD StoRAGE

When transporting the product, disconnect the power cord

and dismount the product. Carry the product using the

handles on both sides of the frame. Store the product in a

secure place that is not accessible to children.

Clean the product using a brush and vacuum cleaner

before storage.

English