FAS FASTER GCD Manual Del Usuario página 85

FASTER GCD – Issue 03
The character with the 00 code moves the cursor forward by one position.
CAUTION! : If the cursor is on the other side of the first character of the message and you press the ESC key
to return to the main menu, the message is cut off at the point which corresponds to the position of the
cursor; therefore before quitting, make sure that the cursor is moved to the end of the message.
It is advisable to prepare the message on a piece of paper using the codes in the table (spaces included) and
then enter it in the machine.
Command 99 Event display menu:
the following options are available:
1. Error events
2. Powering off/on
3. Temperature recording
4. Recovery of the log file.
1.Error events
This command displays the last 20 error events; to go from one display to another press the ENTER key. At
the end of the display, the system asks the user to confirm the clearing of all the data. Press ENTER to
confirm or ESC to leave the records as they are.
ERROR
SUB-CODE
CODE
01 Number selection code
02 Number selection code
05 Number selection code
09 Number selection code
10 (*) 38 - 39
11 (*) 38 - 39
16 (*) 33 - 38 - 39
17 (*) 38 - 39
18 (*) 38 - 39
30 (*) 38 - 39
31 (*) 38 - 39
32÷38 (*) 38 - 39
39 (*) 38 - 39
51 (*) 38 - 39
55
61 Number selection code
62 Number selection code
65 Number selection code
69 Number selection code
91 Number selection code
93
( * ) Key:
33 = Photocells
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: [email protected]
Motor blocked (the spiral does not rotate)
The spiral does not complete the rotation
Motor disconnected
Possible microswitch defect or spiral motor wiring defect
Internal temperature feeler faulty
Evaporator probe faulty
Error communication with peripheral (a board for the electric
panel)
Communication break during sale cycle without credit
collection
Communication break during sale cycle with credit collection
Fridge safety has intervened
Photocell test error .
Photocell calibration error
photocell safety
Interruption of peripheral connection at the beginning of the
sale cycle.
/ Payment system out of service.
Motor blocked (the spiral does not rotate) SLAVE A
The spiral does not complete the rotation SLAVE A
Motor disconnected SLAVE A
Possible microswitch defect or spiral motor wiring defect
SLAVE A
Selections not reset.
/ Fridge safety has intervened
FAILURE
33
E
N
G
L
I
S
H