Pulsar TRAIL LRF XQ28 Instrucciones De Operación página 15

When operating a thermal sight, defective (dead)
pixels (bright or dark dots with constant brightness)
may become visible on the sensor. Thermal sights
Defective
allow the user to repair defective pixels on the
pixel repair
detector using a software-based method or to abort
deletion.
With a short press of the UP and DOWN buttons
=
move the marker to align it with a defective pixel.
Switch the direction of the marker from horizontal
=
to vertical and vice versa with a short press of the M
button.
Align the defective pixel with the fixed cross in the
=
frame – the pixel should disappear.
Before operating the remote control, remember to
Remote
activate it as follows:
Control
Enter the main menu with a long press of the M (4) button.
=
Enter the submenu "Settings" with a short press of the M button.
=
Enter the submenu "Remote control" with a short press of the M
=
button.
23
Press the M button, countdown starts (30 sec), within which hold down
=
for two seconds any RC button.
If activation is successful, the message «Connection complete»
=
appears . I f error occurs, the message «Connection failed»
appears. Repeat the procedure.
The RC is activated and ready for use.
=
This option allows the user to view the following
Info
information about the sight:
Full name
=
SKU number
=
serial number
=
software version
=
Enter the main menu with a long press of the M (4) button.
Enter the submenu "Info" with a short press of the M button.
The status bar is located in the lower part of the display and shows
information on the actual operating status of the sight, including:
A
900m 00:02
1 2 3 4 5
(1) Image inversion mode (only Hot Black)
(2) Actual zeroing profile (for example А)
(3) Zeroing distance (for example, 300 m)
(4) Operating mode (for example, Forest)
(5) Calibration mode
in the automatic calibration mode, three seconds before automatic calibration
a countdown timer 00:01 is shown in place of the calibration mode icon)
(6) Current full magnification for example (
(7) Wi-Fi connection status
(8) Function "Auto shutdown" (for example 1 min)
(9) Running time
(10) Battery charge level (if the sight is powered by the Battery Pack)
or External battery power indicator
external power supply)
hardware version
=
shot counter
=
service information
=
x12.8
1min 22:50
6 7 8 9
x12.8)
(if the sight is powered by an
10
24