Pulsar TRAIL LRF XQ28 Instrucciones De Operación página 11

Enter the submenu with a short press of the M
=
button.
Set the desired access level with the UP (3) and
=
DOWN (5) buttons.
Save your selection and exit the submenu with a
=
long press of the M button.
Zeroing This main menu option allows you to select between
profile one of the three profiles. Each profile includes the
following:
1) Set of distances with zeroing coordinates for each.
2) Reticle color
3) Reticle type
Various profiles can be used when employing the sight on different rifles
and when shooting different cartridges.
Enter the main menu with a long press of the M (4) button.
=
Enter the submenu "Zeroing profile" with a short press of the M button.
=
Select one of the zeroing profiles (shown with letters A; B; C) with the
=
UP (3) and DOWN (5) buttons.
Confirm you selection with a short press of the M button.
=
The name of a selected profile is displayed in the status bar.
=
This main menu option allows you to select reticle
shape, color and brightness.
Reticle setup
Selection of reticle shapes.
Enter the main menu with a long press of the M (4)
=
Reticle type
button.
Enter the submenu "Reticle type" with a short
=
press of the M button.
Select the desired reticle shape out of the list of 13
=
reticles with UP (3) and DOWN (5) buttons.
The reticle types change as the cursor goes down
=
the reticle list.
Confirm you selection with a short press of the M
=
button.
Selection of reticle color
Enter the main menu with a long press of the M (4)
=
Reticle color
button.
Enter the submenu "Reticle color" with a short
=
press of the M button.
Select the desired reticle color: black or white -
=
with UP (3) and DOWN (5) buttons.
Confirm you selection with a short press of the M
=
button.
15
Reticle brightness setup
Enter the main menu with a long press of the M (4)
=
Reticle
button.
brightness
Enter the submenu "Reticle brightness" with a
=
short press of the M button.
1
Set the desired reticle brightness from 0 to 10 with
=
UP (3) and DOWN (5) buttons.
. .
. .
Confirm your selection with a short press of the M
. .
=
. . button.
.
Adding new distance:
To zero your rifle, you need to set a zeroing distance
Zeroing
first.
Enter the main menu with a long press of the M (4)
=
button.
Select main menu option
=
short press of the M button.
Enter the submenu "Add new distance"
=
short press of the M button.
Set the values for each digit with the UP (3) and
=
DOWN (5) buttons. Switch between the digits with a
short press of the M button.
Having set the desired distance, hold down the M
=
button to save it.
The distance you set first becomes a primary
=
distance – shown with icon
distance value.
Note: max. number of zeroing distances is 5 for
each profile.
Operating the distances:
Enter the main menu with a long press of the M (4)
=
button.
Select main menu option
=
short press of the M button.
Enter the submenu operating the distances
=
and enter it with a short press of the M button –
distances at which zeroing has been done will be
shown.
300m ....
+7.0
600m ....
0
and enter it with a
with a
150m
on the right to the
0
and enter it with a
16