Pulsar TRAIL LRF XQ28 Instrucciones De Operación página 10

Menu contents and description
Wi-Fi Wi-Fi ON/OFF
Off
On
The devices have four operating modes of the
thermal imager: Forest (observation mode of
Mode
objects within low thermal contrast conditions),
Rocks (observation mode of objects within high
thermal contrast conditions), Identification (high
detalization mode), User (individual brightness and
contrast settings).
Press and hold the Menu button to enter the
=
menu.
Select the 'Operating mode' option. =
A short press of the Menu button opens the menu.
=
Select one of the settings described below with
=
the UP / DOWN buttons.
A short press of the Menu button confirms the
=
selection.
Rocks Mode – This is the best mode when
observing objects after a sunny day or within urban
conditions.
Forest Mode – This is the best mode when
searching and observing within field conditions,
against the background of leaves, bushes and
grass. The mode is highly informative about an
object being observed as well as landscape details.
Identification Mode – This is the best mode when
observing objects within adverse weather
conditions (fog, mist, rain and snow). It allows you to
recognize the characteristics of an object being
observed more clearly. Zoom increase may be
accompanied by insignificant image graininess.
User Mode – It allows you to configure and save
custom brightness and contrast settings, as well as
one of the three modes as basic.
Hold down the M (4) button to enter the main
=
menu.
Select submenu with UP (3) and DOWN (5)
=
Graphics
buttons.
brightness
Press briefly the M button the enter the submenu.
=
Set the desired graphics brightness (menu and
=
status bar icons) from 0 to 10 with UP/DOWN
buttons.
13
Confirm your selection with a short press of the M
=
button.
Calibration
Enter the main menu with a long press of the M (4)
=
button.
Enter the submenu with a short press of the M
=
button.
Select one of the below calibration modes with
=
UP (3) and DOWN (5) buttons.
Confirm selection with a short press of the M
=
button.
A
SA
M
Wi-Fi setup
This menu option allows you to set up your sight for
Wi-Fi settings
operation in a Wi-Fi network.
Password
This submenu allows you to set a password to
setup
access your thermal sight from an external sight.
The password is used to connect an external sight
12345
(i.e. smartphone) to your thermal sight.
Enter the main menu with a long press of the M (4) button.
=
Enter the submenu "Wi-Fi" with a short press of the M button.
=
The default password (12345 or 12345678 depends on product
=
firmware) will appear on the screen.
Set the desired password with the UP (3) and DOWN (5) buttons
=
(button UP to increase value; button DOWN to reduce). Switch between
digits with a short press of the M button.
Save the password and exit the submenu with a long press of the M
button.
Access level
This submenu allows you to set required access
setup
level of the Stream Vision application to your sight.
Access level Owner. The Stream Vision user has
=
the complete access to all sight's functions.
Owner
Guest Access level Guest. The Stream Vision user has
=
the access only to the real time video stream from
the sight.
Enter the main menu with a long press of the M (4)
=
button.
14