Refrigerator Section; Important; Adjusting Shelves - KENMORE ELITE 795.7802 Manual De Uso Y Cuidado

REFRIGERATOR SECTION

The shelves in your refrigerator are adjustable to meet
your individual storage needs. Your model may have full
or split shelves.
Adjusting the shelves to fit different heights of items will
make finding the exact item you want easier. Doing so will
also reduce the amount of time the refrigerator door is
open which will save energy.
IMPORTANT: Do not clean glass shelves with warm water
while they are cold. Shelves may break if exposed to
sudden temperature changes or impact.
CAUTION: Glass shelves are heavy. Use special care
when removing them.
ADJUSTING SHELVES (SPLIT SHELF)
Remove shelves from the shipping position and replace
shelves in the position you want.
To remove a shelf — Tilt up the front of the shelf
in the direction of
and lift it in the
1
direction of . Pull
2
the shelf out.
To reinstall a shelf — Tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired height.
Then, lower the front
of the shelf so that the
hooks drop into the
slots.
CAUTION: Make sure that shelves are level from one
side to the other. Failure to do so may result in the shelf
falling or spilling food.
Make sure that the shelf stopper is completely inserted
between the wall ribs.
Make sure that hooks are inserted in correct position.
(Left shelf to left hole, right shelf to right hole only)
1_MFL67855601_Eng.indd 31
USING YOUR REFRIGERATOR
ADJUSTING SHELVES (FULL SHELF)
To remove a shelf — Lift up the back of the shelf
slightly, then pull the shelf forward and out.
To reinstall a shelf — Slide the shelf into the guides
until it stops.
31
2013.7.25 8:51:50 AM