ROHO nexus SPIRIT Manual Del Usuario página 9

Placing the nexus SPIRIT Cushion on Your Wheelchair
Place the nexus SPIRIT Cushion on your
wheelchair so that the contoured foam area is in the
front portion of the wheelchair seat and the DRY
FLOATATION cushion insert is in the back portion.
The cushion should be placed on the seat so that
the cushion insert cells are facing upward.
The cover should be on the cushion so that the zipper area is in the
back portion of the wheelchair seat and the side logo is in the front
left corner. The non-skid material is on the bottom of the cover.
Adjusting the DRY FLOATATION Cushion Insert
IMPORTANT! Do Not Skip This Section.
Step 1: Open air valve by
twisting it counter-clockwise.
Step 3: Remove the pump
hose from the valve and close
it by twisting it clockwise.
Step 2: Attach the rubber
hose on the ROHO Pump to
the end of the valve. Inflate
the cushion insert with the
pump until just before the
cushion begins to arch.
Step 4: Sit on the nexus
SPIRIT Cushion in your
normal sitting position with
armrests and footrests
properly placed.
7