Status Information; Changing The Preheat Temperature; Reduced Mode - VMI PRO 1000 Manual De Instalación Y Mantenimiento

4.3.2.2.2

Status information

Levels 1
New filter
Filter
Empty
Batteries
batteries
Network No
communication

4.4 Changing the preheat temperature

GOAL: Changing the intake air temperature or disabling this feature.
1- Go to the SETTINGS menu and select the temperature pictogram.
2- Use the dial to select the required temperature subject to available values.
3- Press the button to confirm. To disable preheating, select the
4- The temperature will stop flashing to confirm that it has been accepted by the VMI®. If the
latter is not the temperature selected, it means that the control unit has ignored the change.
The operation will need to be repeated.
SETTING

4.5 Reduced Mode

Reduced mode is a safety mode of the VMI® PRO.
When Reduced mode is enabled,
The machine switches into Reduced mode if:
•
The outside air temperature is far too high to draw outdoor air into the house at normal speed.
•
One or more failures are critical for the machine.
In these cases, the air renewal rate is minimised.
2 3
Turn
the dial
is shown on the control unit display.
4 5
pictogram.
SELECTING THE
TEMPERATURE
6
Filter full
New batteries
Excellent
communication
Press the
button
35