Power Mode; Temperature Mode - Caso Blue Two Manual De Usuario Original

15.4.3

Power Mode

15.4.4

Temperature Mode

caso Blue Two
► When the cooking process is completed turn the
temperature dial to the Standby position (all the way to the left).
The acoustic signal sounds and the appliance is placed in
Standby mode.
► If you do not select a setting within 2 hours the appliance
automatically switches over to Standby
 After the device has been turned on with the On/Standby key, it
always operates in the preset power mode and the display
shows "0".
The power indicator lights up and the digital display shows
power level P-6 and blinks.
 You can select the power level (1-10) by turning the dial to the
right + or to the left -.
When the selection has been made, the indicator in the displays
stops to blink and the power level will be displayed within 5
seconds. If the power level is not displayed, you should select it
via the menu key.
 If the induction cooker detects an excess temperature on the
hob during cooking it displays error message E6. The heating
process is stopped and the device switches to stand-by mode
for 60 seconds.
 The error message will not be cancelled until the temperature
has dropped to below 100°C.
 After turning the device on with the On/Standby key, the
temperature mode can be selected by pressing the menu key.
 You can set the temperature level by turning the dial to the right
+ or to the left - and selecting, for example, 140°C. The selected
temperature level appears in the display and blinks.
 When the selection has been made, the indicator in the displays
stops to blink and the temperature level will be displayed within
5 seconds. If required, another level can be selected anytime.
 If the current temperature is lower than the set level, the cooker
heats up in order to reach the set level. When the temperature
reaches or exceeds the set level, the device adjusts the heat in
order to maintain the set temperature.
Operation and Handling
58