15.4.3
Power Mode
15.4.4
Temperature Mode
caso SlimLine 3400
► If the pot is removed from the hob, then the power output is
reduced immediately, E1 appears in the display and the
acoustic signal sounds repeatedly.
► When the cooking process is completed turn the
temperature dial to the Standby position (all the way to the left).
The acoustic signal sounds and the appliance is placed in
Standby mode.
► If you do not select a setting within 2 hours the appliance
automatically switches over to Standby
After the device has been turned on with the On/Standby key, it
always operates in the power mode.
The power indicator lights up and the digital display shows
power level P-0 and blinks. On the right side of the display you
can see a little blue point in front of the "P".
With the + / - Keys (2+3), you can change the settings at
any time in a range from 1 – 10.
When the selection has been made, the indicator in the displays
stops to blink and the power level will be displayed within 5
seconds. If the power level is not displayed, you should select it
via the menu key.
► We recommend to select the function "Power stage" in case
of steaming food or boiling water for example. So the
overheating protection "E05" will not be activated.
After turning the device on with the On/Standby key, the
temperature mode can be selected by pressing the menu key
twice. The little blue point is now in front of the "°C".
With the + / - keys (2+3), you can change the settings at any
time in a range from 60°C-220°C. The selected temperature
level appears in the display and blinks.
When the selection has been made, the indicator in the displays
stops to blink and the temperature level will be displayed within
5 seconds. If required, another level can be selected anytime.
► In case of grilling or cooking deep fry food we would advise
you to use the function "Temperature" as in this case you can
use temperatures up to 220°C. Otherwise the overheating
protection "E05" will be activated.
Operation and Handling
Please note
Please note
57