b) To tighten the safety harness, please pull the part of the harness on the front side of the seat unit. Make sure
that the belt is not twisted and rests gently (but firmly) on the child's body.
Support pillow:
This seat unit is equipped with a removable support pillow for babies. This offers optimal sleeping comfort and
provides support for the baby's head. We recommend using the support pillow up to an age of 5 months.
II) Using the seat unit in a car
When using the seat unit in a car, always observe the following points:
Never use the seat unit on car seats with activated airbag. The child could be severely injured if the airbag
þ
is triggered. Danger to life and limb!
Always attach the seat unit in the opposite direction of the vehicle.
þ
The passenger seat should be positioned all the way to the back.
þ
Pull the seat belt of the car all the way out and pull it (lap belt) through the two belt guides located on the
þ
front side of the seat unit (see Fig. C).
Buckle the seat belt of the car.
þ
Pull the diagonal strap of the car seat belt (shoulder belt) through the belt guide which is located on the
þ
back of the seat unit (see Fig. D & E).
The transport handle of the seat unit must be correctly positioned for use in the car (see Fig. F).
þ
The seat unit is now correctly mounted.
þ
III) Adjusting the transport handle
To adjust the transport handle, please press the two red buttons on the sides of the transport handle with both
hands at the same time and adjust it. The buttons lock into place as soon as the next position of the handle is
reached. This is confirmed by an audible „click".
The handle can be adjusted to the following four different positions (see Fig. G):
1. Use in the car
2. Transport
3. Sleep and cradle position
4. Sitting position (no cradle function)
IV) Care instructions
The fabric parts or the seat unit can be washed with warm soapy water.
þ
Hand washing at a temperature of 30° C is recommended.
þ
Never tumble dry in a clothes dryer.
þ
Removing the fabric parts:
Release the harness system.
þ
Remove the support pillow and harness pads.
þ
Pull the harnesses through the fabric.
þ
Lift off the fabric.
þ
Attaching the fabric:
Stick the harnesses back through the openings in the fabric.
þ
Pull the fabric back onto the seat.
þ
Pull the pads back onto the harnesses.
þ
Insert the support pillow again.
þ
seat unit
|
53
