Operation - koban KDL-02-LED Manual Del Usario

6.

Operation

1. Press the
2. Remove sensor cap and place the sensor perpendicular to the
light.
3. Select LUX or FC.
4. If you want to keep the reading value on the LCD screen
permanently after testing, Press the
5. When done testing, replace the sensor cover to protect the
filter and sensor.
•
Data Hold
Freezes the reading present on the LCD screen at the moment the
button is pressed.
•
ZERO
Press the
on the LCD scree, when the light sensor cap is not attached
"CAP" will be shown on the screen. Make sure that it is Attached
to the light sensor.
•
MAX/AVG/MIN
Press button simultaneously Lockup data maximum and
average and minimum value of measure data. Press the
for more than 1 seconds to disable this feature.
www.grupotemper.com
button to turn power on or off.
button for the zero adjustment if any digist appear
KDL-02-LED
LED Light Meter
button
button
7