Record And Storage Of Measurement Data; Installing Operation Software In A Computer; Linking And Communication Between The Meter And A - koban KS 6701 Manual De Instrucciones

KS 6701
Multifunction sound level meter

Record and storage of measurement data

To save real-time data in the meter, by pressing the "FAST∕SLOW" button
for 2 seconds, "RECORD" symbol displays on the LCD screen. At the same
time, the meter starts to record real-time data until it's memory is full. LCD
screen displays "FULL" symbol, it indicates that the meter can not save data
continually.
To Delete data in Sound Level Meter's memory, by pressing the "LEVEL
▲" button for 2second, LCD displays "CEL" symbol, then press
"LEVEL▼" button for 2 second, "CEL" symbol flashes, after a few
seconds, it returns to normal display, it indicates that the data have deleted.

Installing operation software in a computer

Insert the accessory CD to the CD-ROM driver of a computer, click "setup.
EXE" to install the software in the hard disk, When installation finishes, click
"MS6701 DIGITAL SOUND LEVELMETER" in the program menu, then the
operation window shows on the computer...
Linking and communication between the meter
and a computer
1. Connect the infrared output socket of Sound Level Meter and RS232
interface of a computer with the accessory cable.
2. 2.Run "MS6701 DIGITAL SOUND LEVELMETER", click "START" to
receive and display data.By pressing "RS232" button for 2 second
on the meter, real-time sound level data are transmited to computer.
"SENDING" symbol displays on LCD screen. Press "RS232" button for
2 second again, transmission stops.
3. 4.By pressing "A / C" button for 2 seconds, the memory data of the
meter are transmited to computer. Symbol "SENDING MEMO" display
on LCD screen. During transmited computer displays "Down loading
Instructions manual | 12 www.grupotemper.com