Listening To Other Components; Updating The Software - Sony RDP-XA700iPN Manual De Instrucciones

Listening to Other
Components
You can enjoy the sound from an optional
component, such as a portable digital music
player, through the speakers of this unit. Be
sure to turn off the power of each component
before making any connections.
1
Firmly connect the line output
jack of a portable digital music
player (or other component) to
the AUDIO IN jack on the rear of
the unit, using a suitable audio
connecting cable (not
supplied).
2
Press the ?/1 button to turn on
the unit.
3
Turn the connected component
on.
4
Press the AUDIO IN button to
select the source.
5
Play the connected component.
The sound from the connected component
is output from the speakers of this unit.
Notes
• The audio connecting cable required depends on
the component. Make sure the cable is correct for
the component to be connected.
• If the volume is low, adjust the volume level on the
connected component first. If the volume is still too
low, adjust the volume level on the unit.

Updating the Software

When a new update is available, the UPDATE
indicator lights up green while the unit is
connected to the Internet.
1
Check that the UPDATE
indicator lights up green.
2
Press and hold the UPDATE
button on the top of the unit.
The unit beeps, then quits or stops all
operations automatically and the update
starts.
The UPDATE indicator flashes during
the update. When the update has
completed, the UPDATE indicator turns
off.
Notes
• When an error occurred, the UPDATE indicator
flashes quickly and all other indicators light up.
Then the unit restarts automatically.
• You cannot operate the unit until updating has
completed.
• It may take about 20 minutes to update the
software. The time required depends on the size of
the update content and type of Internet connection
you are using.
• Do not disconnect the AC adaptor and the AC
power cord during the update.
19
US