Connecting To The Personal Computer - Sony Vaio VGP-UPR1 Manual De Instrucciones

2
Insert the supplied installation CD into the CD-ROM drive.
The "AutoPlay" screen will appear.

Tip
If the screen does not appear automatically, right-click "Setup.exe" of the CD-ROM, then click "Run as

administrator. "
3
Click "Run Setup.exe" in the "Install or run program" screen.
If the "User Account Control" screen appears, click "Continue. "
4
Complete the installation by following the instructions on the screen.

Tip
After the installation is complete, a screen that requests to reboot the personal computer may appear. In

this case, select "OK. "

Connecting to the personal computer

Notes
Install the software before connecting the product (page 5).

Be sure to connect the product directly to the USB connector of the personal computer. Do not connect through a USB

hub.
When connecting to a personal computer for the first time, disconnect all devices from this product.

The product does not support Windows Aero. If the product is connected to a personal computer, it will change to the

basic user interface.
Movie playback and software that requires 3D processing are not supported on the display connected to this product.

1
Connect the plug of the supplied AC adapter to the product.
2
Insert the plug of the supplied power cord into the AC adapter.
3
Insert the plug of the supplied power cord into the wall socket.
The DC IN lamp will light up.
4
Connect the product to the USB connector of the personal computer.
A screen that requests to reboot the personal computer may appear. In this case, select "Restart
Now. "

Tip
The screen may dim for a moment after connecting the product to the personal computer. This is a normal

characteristic of setup and is not a malfunction.
You can adjust the length of the product's USB cable by using the drain at the bottom.

6
GB