Tabla de contenido
Idiomas disponibles
Idiomas disponibles
NOTE: The moving
Demo Button
massage mechanism
For a brief demonstration of the features of the Massage Cushion,
press the Demo button. The L.E.D. light will blink to indicate
always "parks"
active function. The Demo can only be activated when the back
or finishes in its
mechanism is at the bottom position or Power Button is on. If
lowest position. It
the back mechanism does not start at the bottom, it will go to
will continue to this
the bottom automatically. The unit will briefly go through each
position after the
function. Once completed, the unit automatically turns off.
power has been
Upper
turned off. If the
Upper can only be activated when either Knead, Rolling,
electrical supply is
or Tapping is on. Press "Upper" once, the LED light will
interrupted, when
illuminate, Kneading, Rolling, or Tapping the upper back. If
power is restored, the
"Upper" is already on, press it again, light will stay on the
mechanism will "park"
upper back area.
or move to its lowest
position.
Lower
Lower can only be activated when Kneading, Rolling,
or Tapping is on. Press Lower once, and LED light will
illuminate, Kneading, Rolling or Tapping the lower
back. If Lower is already on, pressing it again will
keep massage on the lower back.
Kneading Massage
Kneading is a deep penetrating massage. "Knead" can only be activated
when Power is on. Press "Knead" once, light on, rolling will be off, activate
Knead; press it again, Knead off.
Spot Massage Feature
While the unit is in Kneading or Tapping, press spot button and either up or
down and massager will stop in fixed position. Once the feature is operating,
you may adjust the mechanism position by holding down either button until
the desired position is reached. The Up arrow will move the mechanism
upwards, the Down arrow will move it downward. Once the button is released,
the mechanism will stop in that place. Spot position will move from its
current position when Upper, Lower, or Perfect Fit is pressed. Press Rolling
to turn off the spot and start rolling or Perfect Fit by default.
Rolling Massage
Rolling is like two hands working slowly up and down your back. "Rolling"
can only be activated when Power is on. Press "Rolling" once and LED light
will illuminate; Kneading and Tapping will be off. press it again, Rolling will
turn off.
8
Quad Shiatsu
Massage Cushion
Power Button
To turn on the Massage functions, first press the POWER button. The
L.E.D indicator will illuminate and confirm you selection. Knead and
Perfect Fit will turn on by default, kneading the full back. To turn off the
massage functions, simply press the button again. The L.E.D indicator
will blink while the massage mechanism returns to its lowest point and
then turn off.
Perfect Fit™
Perfect Fit™ technology allows you to set the massage range to the
height that is perfect for your back. Perfect Fit can only be activated
when Power is on. Press Perfect Fit once, LED light will illuminate, and
full back massage will turn on. Press twice, the LED light will flash, and
the mechanism's current position is considered the highest distance,
mechanism will travel within the designated height and the bottom.
Press button a third time, and massage function will return back to full
back massage. If the designated height is shorter than 1/3 of the travel
distance, it will take 1/3 of the travel distance as the highest height.
Tapping
Tapping is a fast, invigorating massage. Tapping can only be
activated when Power is on. Press "Tapping" once, light on,
Rolling will be off, activate high & Tapping; press it twice, activate
low & Tapping; press it third time, Tapping off.
Width Adjustment Feature
Width can only be activated when Rolling or Tapping is on. Press
the button to adjust the massage nodes width. With each press,
the massage heads will move to the next available position.
Heat Button
For soothing heat, when either Kneading, Rolling or Tapping
massage is on, simply press the heat button and the
corresponding red L.E.D light will illuminate. To deselect, press
the button again and the corresponding L.E.D. light will turn off.
NOTE: There is a 15-minute auto shut
off on the unit of your safety.
9
with heat
Fig. 1
Tabla de contenido
