Infrico EVV100 Manual De Instalación Y Funcionamiento página 36

Cleaning the cabinet
To clean the cabinet, the following instruction should be followed:
• Disconnect the unit from the power supply and remove all food product from inside.
• Open all doors and allow the cabinet to reach room temperature. Remove all accessories and
clean them with a baking soda or mild soap and warm water solution. Dry all of the accessories
completely with a soft clean cloth.
• Once the cabinet has reach room temperature, wash the entire cabinet inside and out with a
baking soda or mild soap and warm water solution. Rinse thoroughly with clear water and dry
with a soft clean cloth. Failure to dry all surface completely may cause water stains. There are
also stainless-steel cleaners available which can restore and preserve the finish of the steels
protective layer.
• Return all accessories to their initial positions and plug the unit in.
• Early signs of stainless-steel breakdown can consist of small pits and cracks. If this has begun,
star to apply stainless steel cleaners in order to restore the passivity of the steel.
• Many product foods have an acidic content which can attack stainless steel, such as mustard,
mayonnaise, lemon juice, tomatoes and other vegetables.
NOTE: Never use steel pads, wire brushes or scrapers to clean the cabinet.
NOTE: Cleaning solutions need to be alkaline based or non-chloride cleaners. Any cleaner
containing chlorides will damage the protective film of the stainless steel.
Maintenance of weather stripping
• Weather stripping requires a regular cleaning that protects its
elasticity, in order to guarantee an appropriate closure and prevent the
growth of molds. Weather stripping can be cleaned with soapy water.
Avoid the use of strong cleaners and sharp utensils.
• The weather stripping can be easily removed by removing them from
the profile of the door and replacing them by pressing them against it.
33