Using The Monitor; Installing/ Changing The Batteries - A&D Medical UA-651BLE Manual De Instrucciones

Installing/ Changing the batteries

1. Remove the battery cover.
2. Remove the used batteries from
the battery compartment when
changing them.
3. Insert new batteries into the
battery compartment as shown,
taking care that the polarities
(+) and (-) are correct.
4. Replace the battery cover. Use
only R6P, LR6 or AA batteries.
CAUTION
☞
Insert the batteries as shown in the battery compartment.
If installed incorrectly, the device will not work.
☞
When
that the battery needs to be replaced, replace all batteries
with new ones. Do not mix old and new batteries.
It may shorten the battery life, or cause the device to
malfunction. Replace the batteries two seconds or more after
the device turns off.
☞
If does not appear, then the batteries are completely
drained.
☞
The battery life varies with the ambient temperature and
may be shorter at low temperatures.
☞
Use the specified batteries only. The batteries provided with
the device are for testing the device performance and may
have a limited life.
☞
Remove the batteries if the device is not to be used for a
long time. The batteries may leak and cause a malfunction.
A&D Medical (Toll-Free): 1-888-726-9966
blinks on the display and the device indicates

USING THE MONITOR

Step 2
Step 4
Step 3
Step 1
E-8