Technical Data; Noise Information; Vibration Information - Worx Sonicrafter WX667 Manual Del Usuario

1. ON/OFF SWITCH
2. VARIABLE SPEED DIAL
3. CONSTANT SPEED ELECTRONICS
4. VENTING SLOTS
5. UNIVERSAL-FIT ACCESSORY INTERFACE*
6. SMALLER FLANGE (FOR OTHER BRANDS'
SANDING PADS)
7. FLANGE
*Works with other oscillating tool brands'
accessories.
The following compatible brands are
trademarks owned by third parties which may
be registered by their respective owners:
Black & Decker
®
Craftsman , Dremel
®
Mastercraft , Milwaukee
®
Cable , Ridgid , Ryobi
® ®
Not all the accessories illustrated or described
are included in standard delivery.

TECHNICAL DATA

Type Designation
machinery, representative of sonicrafter)
Rated voltage
6
Rated power
Oscillations speed
Protection class
Tool weight (without power cable)

NOISE INFORMATION

A weighted sound pressure
A weighted sound power:
K &K :
pA wA
Wear ear protection when sound pressure is over:
80dB(A)
Oscillating Tool
, Bosch , Chicago Electric
®
, Fein , Genesis , Makita
® ® ®
, Performax
® ®
, Skil , and Tool Shop
® ®
WX667 (6-designation of
230-240V~50Hz
11000-20000/min
L
：73.7dB(A)
pA
L
：84.7dB(A)
wA

VIBRATION INFORMATION

Vibration total values (triax vec tor sum) determined
according to EN 60745:
Typical weighted
vibration
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
,
®
which the tool is used dependant on the following
,
®
examples and other variations on how the tool is
, Porter
used:
.
®
How the tool is used and the materials being cut or
sanded.
The tool being in good condition and well
maintained
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
230W
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
/ll
should also take account of all parts of the operating
1.3kg
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
3.0dB(A)
vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration
tool use across a number of days.
Vibration emission value
a = 4.690m/s
2
h
Uncertainty K = 1.5m/s²
C or less.
O
EN