Tabla de contenido
Jog dial
Molette de
défilement
Disco Jog
OK button
Touche OK
Botón OK
164
LCD Monitor
Écran ACL
Monitor LCD
E
CARD SETUP
1
Press the Menu button in the Display mode, then press
the bottom arrow on the Jog dial to select
2
Press the right/left arrows on the Jog dial to select either
All-Frame erase
or Card format
button. Next, press the OK button with YES selected to
perform All-Frame erase or Card format.
To cancel, press the Menu button or select NO in the
screen above and press the OK button.
3
When complete, NO PICTURE appears on the LCD
monitor.
Protected pictures will remain when All-Frame erase is
performed, but will be erased with Card format.
Caution:
Be careful not to erase important picture data by
mistake as it cannot be retrieved.
Never open the card cover, eject the card,
remove the batteries, or pull the plug while
erasing pictures or formatting the card. It may
destroy the data in the card.
See the Note on page 178 for performing Card
format.
.
and press the OK
Tabla de contenido
