Mitsubishi Electric PAC-SF41SCA Libro De Instrucciones página 5

Item
Other Emergency stop
*1 Master system controllers and slave system controller
Management range of
PAC-SF41SCA
When using a system consisting only of PAC-
SF41SCA.
PAC-SF41SCA is set as the master system con-
troller. In this case, the group settings are per-
formed with PAC-SF41SCA.
NOTE: It is not possible to set the master and slave settings with more than one group remote control-
ler and control the same groups. Also, the groups listed below cannot be set.
• Unit group which are not under the management of the master controller and are managed by the
slave system controller.
Group
• A common group is managed by more than two master controllers.
Group
• A slave system controller which exceeds the management range of the master system controller of
two or more.
Master system
controller 1
Group
Enables external input to this unit of emergency stop, which turns off
overall air conditioning and Lossnay and allows prohibition of remote
controller operation, including main unit.
Unit
Master system
controller
Master system
controller 1
Group
Specification
Management range of the
master system controller
Management range
of PAC-SF41SCA
When using a system where PAC-SF41SCA is
controller by a different system controller.
PAC-SF41SCA is set as the slave system con-
troller. In this case, the group settings are not
performed with PAC-SF41SCA.
Slave system
controller
Group
Master system
controller 2
Group
Slave system
controller
Group
Unit Unit
Group
Group
Master system
controller 2
Group
5