Setting The External Device Interrupt Mode; Setting The Interrupt Icon Display; Setting The Navigation Mode; Setting The Navigation Interruption - Alpine IVA-W200 Manual De Instrucciones

Setting the External Device Interrupt Mode

If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is
connected to the IVA-W200, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CD
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801B, see your authorized Alpine dealer.
Setting item: IN INT. MUTE
Setting content: OFF / ON
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output. The icon that is set in "Setting
the Interrupt Icon Display" is displayed.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.

Setting the Interrupt Icon Display

The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
Setting item: IN INT. ICON
Setting content: INT / TEL
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.

Setting the Navigation Mode

When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
34
-EN

Setting the Navigation Interruption

With an Alpine navigation system connected to the IVA-W200, the
voice guidance of the navigation system will be mixed with the radio or
CD play.
Setting item: NAV. MIX
Setting content: OFF / ON
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
To adjust the navigation interruption volume level, the adjustment
for NAV. LEVEL can be performed in "Adjusting the Audio" on
page 24 after setting to ON.
• The audio volume during navigation guidance is set by adjusting the
audio volume during the navigation announcement. When the
announcement finishes, the normal audio volume and the previous
audio screen are restored. The audio volume during the navigation
guide announcement is always at or below the current listening
volume. If the navigation announcement cuts in while the audio
listening level is adjusted to a level lower than normal audio level, it
automatically resets to the current level. As a result, when the
navigation guide cuts in, the audio volume does not increase.
• This setting is effective when NAV. IN of SYSTEM list screen is ON.

Setting the AUX Mode

Setting item: AUX IN
Setting content: OFF / ON / VCR / GAME / TV / EXT. DVD /
EXTPLYR
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
"EXTPLYR" is currently not available as a future system upgrade.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.

Adjusting the External Input Audio Level

After setting to ON in "Setting the AUX Mode," this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting content: LOW / HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.